Equal Elbow Brass Compression Fitting For Pex Pipe

Short Description:

PEX Fitting, Brass Fittings

Our PEX fittings are generally made of CW617N brass and CU57-3 brass. In case of special needs, other materials such as DZR can be used.

We will customize special rings according to the customer’s requirements, with the ring processed into a barbed shape to prevent the tube from falling off when pressure levels are above 10kg.

We can provide PEX fittings in a variety of sizes, from 15mm x 1/2’’ x 2.0mm to 32mm x 1’’ x 3.0mm, with the following structural forms: straight, elbow, tee, wall-plated, etc.


Product Detail

Product Tags

Optional Specification

Equal elbow brass compression fitting for pex pipe

Product Information

Product name Brass Elbow Pex Fittings
Sizes 16, 18, 20, 22, 25, 28, 32
Bore Standard bore
Application Water, oil, gas, and other non-corrosive liquid
Working pressure PN16 / 200Psi
Working temperature -20 to 120°C
Working durability 10,000 cycles
Quality standard ISO9001
End Connection BSP, NPT
Features: Forged brass body
Precise dimensions
Various sizes available
OEM production acceptable
Materials Spare Part Material
Body Forged brass, sandblasted
Nut Forged brass, sandblasted
Insert Brass
Seat Open copper ring
Stem N/A
Screw N/A
Packing Inner boxes in cartons, loaded in pallets
Customized design acceptable

Key Words

Brass Fittings, Brass Pex Fittings, Water Pipe Fittings, Tube Fittings, Brass Pipe Fittings, Plumbing Fittings, Pex Pipe Fittings, Elbow Pex Fittings, Compression Fitting, Brass Pipe Fittings, Brass Elbow Pex Fittings, Brass Compression Fittings, Pipe Fittings, Pro Pex Fittings, Plumbing Pipe Fittings, Pex Push Fittings

Optional Materials

Brass Fittings, Brass Pex Fittings, Water Pipe Fittings, Tube Fittings, Brass Pipe Fittings, Plumbing Fittings, Pex Pipe Fittings, Elbow Pex Fittings, Compression Fitting, Brass Pipe Fittings, Brass Elbow Pex Fittings, Brass Compression Fittings, Pipe Fittings, Pro Pex Fittings, Plumbing Pipe Fittings, Pex Push Fittings

Optional Color And Surface Finish

Brass natural color or nickel plated

Applications

Fluid control system for building and plumbing: Water,oil, Gas, and other non-corrosive liquid

Precautions For Installation Of Brass Compression Fittings

1. Do not drain the system by loosening the fitting nut or fitting plug.
2. Do not install or tighten fittings while the system is under pressure.
3. Make sure the tube rests against the shoulder of the compression fitting body before tightening the nut.
4. Do not mix fitting components from different materials or manufacturers - crimp fittings, crimps, nuts and fitting bodies.
5. Do not rotate the fitting body. Instead, fix the fitting body and turn the nut.
6. The material of the brass compression fittings should be softer than the material of the fittings. Example: Stainless steel tubing must not be used with brass fittings.
7. Surface finish is very important for proper sealing. Tubing with dents, scratches, raised portions or other surface defects of any kind will be difficult to seal, especially in gas applications.
8. The pipe must be inserted to the end during installation.
9. The two card sets are indispensable, and the front and rear cannot be reversed.

Contact Us

contact

  • Previous:
  • Next: